1. <table id="0avv9"><ruby id="0avv9"></ruby></table>
    2. <object id="0avv9"><label id="0avv9"></label></object><pre id="0avv9"></pre>

      1. BMW K1200S

        detailed pictures of footpeg kit installed
        Return to K1200S Page


         

        Left Side


        The turnbuckle rod from the shifter to the transmission
        is shortened to lower the working end of the shifter.

        Right Side

        Here the linkage extender is installed between the lower
        clevis and the actuating rod leading into the master cylinder.
         

         


        Use the new bolts to attach the adapter to the frame.
        Use the factory bolts to attach the peg carrier casting
        to the adapter.

         

         


        In this picture the master cylinder is tied into the sub-casting
        with two hex head bolts and one factory socket head bolt
        with lock washer and nut.

         

        Kit is no longer available in black

         

         

         


        In this picture the notch in the stainless plate fits around
        the flange at the bottom of the master cylinder,
        upper left in picture.

         

         

         

         

         

         

         

           
           
           

        Return to K1200S Page


         

        最好看的2019中文字幕国语
          1. <table id="0avv9"><ruby id="0avv9"></ruby></table>
          2. <object id="0avv9"><label id="0avv9"></label></object><pre id="0avv9"></pre>